The EAE DA110 KNX–DALI Gateway bridges a KNX twisted-pair bus and a DALI lighting line with individual load control — every luminaire on the DALI bus can be addressed and dimmed independently from KNX. Unlike the group-oriented DA100, the DA110 is built for installations where each fixture needs its own command, such as tunable-white, colour, or per-desk lighting in open-plan offices.

The gateway supports up to 64 DALI devices (fluorescent ECGs, LED drivers) on one DALI line with an integrated DALI power supply. It provides 16 lighting scenes while retaining full per-device control, and is compliant with IEC 62386. DALI-side addressing and configuration use the EAE DALI Commissioning Tool; KNX-side objects are parameterized in ETS.

Key Features — Individual DALI Load Control

DALI Line Management

• 64 DALI devices: Individual addressable control of each ECG or LED driver on the line.
• Individual load control: 1:1 KNX-to-DALI mapping — not limited to 16 groups.
• 16 lighting scenes: Scene recall from KNX affecting individually controlled loads.
• Integrated DALI supply: Built-in DALI bus power within device limits.
• IEC 62386: Full compliance with the DALI standard.

Monitoring and Commissioning

• Fault monitoring: DALI device fault status reported as separate KNX group objects.
• EAE DALI Commissioning Tool: DALI addressing, grouping, and extended configuration.
• Front-panel controls: Manual and Test buttons with ON, DALI STATUS, and MANUAL LEDs.

At a Glance

Specification	Detail
Product type	KNX–DALI Gateway — individual load control
Order code	DA110 (SMP DA110)
Control mode	Individual DALI load control
DALI devices	Up to 64 (fluorescent ECG, LED driver)
Lighting scenes	16
DALI power supply	Integrated
Standard	IEC 62386
Bus systems	KNX TP ↔ DALI
Dimensions (H × W × D)	70 × 69 × 91 mm (4 MW)
Mounting	35 mm DIN rail

Full electrical ratings are listed under Technical Specifications. Datasheet, product manual, installation manual, ETS application, DALI commissioning tool, and certificates are under Downloads.

Applications and KNX Integration

• Tunable white and colour: Per-fixture control where each luminaire needs an independent level or colour command.
• Office and retail: Individual dimming of track or panel lights from KNX presence detectors and schedules.
• Maintenance visibility: Fault status of each DALI gear on KNX for facility management.
• Group-oriented alternative: For 16-group zone control with 64 scenes, choose the EAE DA100 KNX–DALI Gateway.
• System infrastructure: Power the KNX line from an EAE PS640 KNX Power Supply.

Choosing EAE DALI Gateways

Use the DA110 when every DALI device must be individually addressable. Use the DA100 when zone-based group control with 64 scenes is sufficient and per-fixture addressing is not required. Both share the integrated DALI supply and EAE DALI Commissioning Tool workflow.