ABB JA/M2.230.1 is the ABB i-bus® KNX Shutter Actuator Module, 2-fold, 230 V AC. Its relay contacts switch two independent electric drives such as shutter motors, blind motors or ventilation-flap drives.

It snaps into a compatible RC/A4.2 or RC/A8.2 Room Controller slot. The host supplies the module interface, detects the inserted type and provides KNX communication, ETS parameterisation and manual functional testing. The module is not a standalone KNX device.

Function and Application

• Channels: 2 mechanically interlocked UP/DOWN relay outputs.
• Application: Reversing control of two independent 115/230 V AC drives.
• Host compatibility: RC/A4.2 and RC/A8.2 basis devices.
• Commissioning: Through the selected host Room Controller application; there is no separate module KNX address or product database.

At a Glance

Specification	Detail
Catalog description	Shutter Actuator Module, 2-fold, 230 V AC
Order code	JA/M2.230.1 (2CDG110003R0011)
EAN	4016779583152
Channels	2 mechanically interlocked UP/DOWN relay outputs
Compatible hosts	RC/A4.2 and RC/A8.2
Nominal Drive Voltage	115/230 V AC
Incoming Supply Range	0…264 V AC through front module contacts
Switching Current	Maximum 6 A AC1/AC3 at 230 V AC
Output Interlock	Mechanical interlock between UP and DOWN contacts
Dimensions	93 × 49 × 42 mm (D × W × H)
Net weight	0.141 kg
Published protection value	ABB currently publishes IP54 for the product; treat this as a configured Room Controller value, not a freestanding enclosure rating.

Installation and Safety

Connect only compatible AC drives and never use the interlocked relay outputs as a safety isolator. Observe the one-drive-per-output and motor-manufacturer requirements. Isolate the Room Controller and all field/load circuits before inserting, removing or wiring the module. ABB currently publishes IP54 for the product; treat this as a configured Room Controller value, not a freestanding enclosure rating.

Use the model-specific technical data, instructions, diagrams and declarations below. Shared manuals may retain historical host names, while ABB's current compatibility records explicitly associate this module with RC/A4.2 and RC/A8.2.