The ABB FCL/S1.6.1.1 Blower Actuator controls one fan bank with up to three speeds via step or changeover relays (3 fan speeds (6 A) + 1 floating aux). A floating output can switch a damper or accessory valve.

Bus-powered MDRC companion to Fan Coil Controllers such as FCC/S1.1.1.1 when fan control is separated from valve/RTC logic. Sister device: FCL/S2.6.1.1.

Key Features

• 1-fold blower control: 3 fan speeds (6 A) + 1 floating aux.
• 6 A relays: Suitable for typical FCU fan motors.
• Floating aux output: Damper / valve accessory switching.
• Bus-powered: No auxiliary mains.
• 4 MW MDRC: Compact DIN-rail mounting.

At a Glance

Specification	Detail
Product type	KNX blower actuator, 1-fold, MDRC
Order code	FCL/S1.6.1.1
Product ID	2CDG110163R0011
Outputs	3 fan speeds (6 A) + 1 floating aux
Relay rating	6 A
Width	4 MW
Supply	KNX bus only

Technical data, installation instructions, drawings, EPLAN, and declarations are under Downloads. Commission with the FCL ETS application from ABB documentation.

Applications

• Separated fan control: Pair with FCC or VC/S valve controllers.
• Multi-speed FCU fans: Step or changeover wiring for 1–3 speeds.
• Damper interlocking: Use floating outputs for zone dampers.

Installation Notes

Mount on a 35 mm DIN rail (4 MW). Connect KNX and fan/aux terminals per the connection diagram. Import the FCL ETS application and parameterize speeds and interlocking.